Hydronix Hydro-Control VI, Operator'S Manual

Page: 65 / 88

Chapter 10 Using the Mix Log
Hydro-Control VI Operators Guide HD0456 Rev 1.7.1 65
Column Units Description
Leaking Water Valve A Leaking Water Valve alarm was triggered during the
batch.
Waiting For Water
Tank Fill
A Waiting For Water Tank Fill alarm was triggered during
the batch.
No Water Required A No Water Required alarm was triggered during the
batch.
Too Much Water
Calculated
A Too Much Water Calculated alarm was triggered
during the batch.
Prewet Target Not
Reached
A Prewet Target Not Reached alarm was triggered
during the batch.
Mix Too Wet
Rejected
A Mix Too Wet alarm was triggered during the batch and
the mix was rejected by the operator.
Mix Too Dry
Rejected
A Mix Too Dry alarm was triggered during the batch and
the mix was rejected by the operator.
Mix Too Wet
Accepted
A Mix Too Wet alarm was triggered during the batch and
the mix was accepted by the operator.
Mix Too Dry
Accepted
A Mix Too Dry alarm was triggered during the batch and
the mix was accepted by the operator.
Water Limit
Exceeded
A Water Limit Exceeded alarm was triggered during the
batch.
Max Dry Mix Time
Exceeded
A Max Dry Mix Time Reached alarm was triggered during
the batch.
Max Wet Mix Time
Exceeded
A Max Wet Mix Time Reached alarm was triggered
during the batch.
Mix Aborted The Mix was aborted during the batch.
Sensor Fault The Sensor communication was lost during the batch.
Mixer Blades worn Mixer Blades worn alarm Activated
Calibration Mix Indicates if the Mix Log was used to calibrated the recipe
* The Unscaled Value for the selected Measurement Mode is added to this column.
Additional Columns for each available Measurement Mode are also saved to the Mix
Log (Only available for selected sensors)
3 Viewing the Mix Trace
To access details for a particular batch, select one of the batches from the list and then click the
View Mix Trace button. This will then display the mix trace page, which provides a graphical