Hydronix Hydro-Control VI, Operator'S Manual

Page: 35 / 88

Hydro-Control VI Operators Guide HD0456 Rev 1.7.1 35
Chapter 7 Running the First Mix
This chapter explains how to set up a recipe and run it for the first time.
1 The Recipe Wizard
[Menu->Recipe Overview->Create Recipe]
Figure 14: The Create Recipe Wizard screen
The recipe wizard enables the operator to easily configure a new recipe. It automatically prompts
for the most important information required in order to set up a new recipe.
Recipe wizard parameter Description
Base On Recipe Number Select an existing recipe to use as a template. This is a quick way
of copying parameters from one recipe to another.
Auto Recipe Number Select to automatically assign the next available recipe number.
Recipe Number Use this to enter a user defined recipe number if the above
parameter is not ticked.
Cement Timeout This is the amount of time after the “Pre-wet Done” signal has been
given before the Hydro-Control triggers an alarm that cement has
not been added
Dry Weight This is the dry weight of the mix, including the cement.
Pre-wet Water This is the amount of water to add during the pre-wet phase.
Main Water This is the fixed amount of water to add during the main water
addition when running in Preset mode.
Dry Mix Time This defines the dry mix time.