Hydronix Hydro-Control VI, Operator'S Manual

Page: 27 / 88

Hydro-Control VI Operators Guide HD0456 Rev 1.7.1 27
Chapter 6 Editing Recipes
This chapter explains how to edit a recipe and describes the recipe parameters and how they are used.
Once a recipe has been created, it will appear in the list on the recipe overview screen. To edit any
recipe simply press on it to select it in the list, and then press the Edit Recipe button.
1 The Recipe Editor
[Menu->Recipe Overview->Edit Recipe]
Figure 11: The recipe editor screen (page 1)
1.1
Recipe Details
Recipe parameter Description
Recipe Number This is the number of the recipe in the Hydro-Control VI.
Batch Number This is the number of the last batch made.
Recipe Name This is the name of the recipe which is displayed on the Overview
Screen.
1.2
Water Addition
Recipe parameter Description
2 Step Addition This enables the two step addition mode, which splits the main
water addition into two stages. During the second stage the
Admixture signal is activated. This can be used whilst dosing
admixtures that have a large effect on the sensor calibration to
keep the moisture display accurate.
Pre-wet Water This is the fixed amount of water to add during the pre-wet phase
of the mix cycle if the Pre-wet Water Control Method is set to Preset
Mode. If not using Pre-wet Water then set this value to zero.