Hydronix Hydro-Control VI, Operator'S Manual

Page: 38 / 88

Running the First Mix Chapter 7
38 Hydro-Control VI Operators Guide HD0456 Rev 1.7.1
Task Action
Select the new recipe from the Recipe List, then select
Menu.
Press
Select Overview to return to the Main Overview screen.
Press
2.3
Start the mix cycle
Task Action
Make sure that the batch control is set so that the mix will not
be discharged automatically. This will allow the mix
consistency to be checked.
On the Overview Screen, press the Start button.
Alternatively, start the mix cycle using the batch control
system.
Wait for the cycle to finish.
Press
2.4
Trim the water manually to reach the desired consistency
Task Action
Check the consistency of the mix. If possible, observe the mix in the mixer
through the inspection hatch to see if more
water is needed.
On the Overview Screen, press the Trim button to
select the trim function options.
Press
Either:
To add a set quantity of water, enter the amount of
water to add and press “Auto Trim”
or
To add water manually, press the “Manual Trim”
button to open the water valve. The water valve will
remain open until the button is released.
Repeat the previous step until the mix is at the
desired consistency, and then press the Finish
button.
Press