ContaminationSensor CS 1000
CS1000 Features
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 16 / 108
BeWa CS1000 3247149p 240 en-us 2011-02-11.doc
2011-02-11
CS1000 Features
The CS1000 Series ContaminationSensor is a stationary measurement unit for the
continuous monitoring of solid particle contamination in hydraulic and lubrication
systems.
The CS is designed to be used in low- or high-pressure hydraulic and lubrication
circuits and test benches where a small amount of oil (between 30 ml/min and 300
ml/min) is diverted for measurement purposes.
The ContaminationSensor is approved for a maximum operating pressure (see
specification on type label) and viscosity of up to 1000 mm²/s.
The particulate contamination is recorded by an optical measurement cell.
The sensor is available with the following options:
with or without 6-digit display and keypad (can be rotated by 270°)
with a 4 … 20 mA or 2 … 10 V analog output
results are output as a cleanliness code according to:
ISO 4406:1999 and SAE AS 4059(D) or
ISO 4406:1987 and SAE AS 4059(D) or NAS
pipe / hose installation or flange installation
All models feature an analog output and an RS485 interface for outputting the
measured cleanliness class. They also have a switch output set to switch at either
increasing or decreasing cleanliness.
CS1000 Restrictions on use
NOTICE
Unpermitted operating media
The ContamonationSensor will be destroyed.
►
Operate the CS1000 only in conjunction with the permitted operating fluids.
►
CS 1xx0
is suitable for operation with petroleum or petroleum-based
refinates.
►
The
CS 1xx1
is suitable for phosphate esters.
►
Observe the maximum operating pressure on the CS 1000 type label.
