Hy-Security SwingRiser 14, Installation And Reference Manual

Page: 11 / 86

Installation and Maintenance Manual
1
Available Models and Features
HySecurity
manufactures twelve different models of hydraulic swing gate operators to suit the size,
weight and desired speed of the gate panel. All of the operator models are derived from the standard
HRG 220, which is the basis of this manual. Take a moment to identify the operator model you have
and note there are some changes in the instructions, especially in regards to final adjustments of
double swing gates. The following chart shows the differences at a glance:
Panel Operator Model Operator Model Operator Model
Single SwingRiser 14 (HRG 220A) SwingRiser 19 (HRG 220) SwingRiser 30 (HRG 220C)
Double SwingRiser 14-Twin (HRG 222A) SwingRiser 19-Twin (HRG 222B) SwingRiser 30-Twin (HRG 222C)
24V UPS Models
Single SwingRiser 14 UPS (HRG 220ADC) SwingRiser 19 UPS (HRG 220BDC) SwingRiser 30 UPS (HRG 220CDC)
Double SwingRiser 14-Twin UPS SwingRiser 19-Twin UPS SwingRiser 30-Twin UPS
(HRG 222ADC) (HRG 222BDC) (HRG 222CDC)
Features:
Horsepower (all HRG 220 models are 1 HP, all HRG 222 models are 2 HP)
Time To Open/Close 14 sec 19 sec 30 sec
UL Usage Class 1
– 4
1
– 4
1
– 4
Warranty 5 years 5 years 5 years
Soft Stop yes yes yes
Soft Start yes yes yes
Gate Panel Ratings:
Weight Capacity 1000 lbs 1600 lbs 3000 lbs
Gate Size Capacity 9 ft. wide 16 ft. wide 16 ft. wide
The SwingRiser (HRG 220) series operator is the only truly industrial grade
swing gate operator on the market today. This tough operator is ideally suited
to dependable operation of massive iron or steel gates. Its 3000-lb capacity
provides plenty of power, and the
Lift and Swing feature eliminates normal
obstacles such as heavy snowfall and inclined or irregular roadways. The
operator’s mechanism is wholly enclosed inside the post and uses no other
devices to push or pull on the gate panel. Its unique closing action self
actuates a locking pin at the end of the gate for unparalleled security.
Quarter turn rotating arc of 90 or 100 . No
actuating arms or back space required.
Low profile power pack and electric panel are
designed to be remotely located. This allows for a
clean presentation at the side of the drive.
Twelve-inch rise in the opening cycle allows the
swing gate to operate easily on slopes or rise over
curbs.
Closing action drops a locking pin at end of gate into
socket in driveway, allowing far better security.
Operator post is treated with an industrial
galvanized flame spray finish to provide excellent
corrosion resistance.
Heavy duty components handle gates to 16 feet
wide and up to 3000 lbs of any construction.
Rated for continuous duty, up to 200,000
cycles with no maintenance.
All components are designed for easy
removal during service.
The hydraulic system features the latest
technology, modular manifolds and
individually replaceable cartridge valves.
Fully compatible with all standard access
control equipment.
Accessories include heaters, vehicle
detectors, photo eyes, gate edges
Hand pump manual operation is standard
equipment.