H.53
TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
ENGINE REASSEMBLY
Workshop Manual Ed. 07-2012
Install the crankcase (8) and tighten the screws (9) following a cross pattern
(use an 8 mm wrench , 8 Nm, 0.8 Kgm, 5.90 ft/lb). Make sure pump gear and
drive gear engage correctly.
Check the O-ring (10) for damage and replace it if needed.
Refit the spring (11) of the oil filter (12).
Refit the oil filter into its housing and tighten the screws (13) using an 8 mm
wrench (5.5 Nm, 0.55 Kgm, 3.98 ft/lb).
When assembling filter to cover, make sure to fit the filter oil seal
(A) first onto the cover (6).