Hurricane HKSA 220-2, Manual

Page: 18 / 185

17
, Description of device / spare parts
Position Denomination Order-No.
1. Rotary table, complete 363731
2. Supporting table 363732
3a/3b. Mounting screw (with spring) 363704
4. Chain stop 363705
5. Guide plate 363706
6. Guide rail
7. Locking nut 363707
8. Setting screw (for grinding depth) 363708
9. Grinding wheel (100 x 3.2 x 10 mm) 363709
10. Cover 363733
11. Handle 363711
12. ON-OFF Switch 363712
13. Grinding head 363713
14. Screw cap 363729
15.
Nut M8, self-locking 391037
16. Flange 363715
17. Safety label 363716
18.
1 pair of carbon brushes (not shown) 363717
19. Grinding wheel (100 x 4.5 x 10 mm) 363718
20 Protective cover 363720
21.
Nut
Guarantee
Please observe the enclosed terms of guarantee.
Possible faults
Before each fault clearance
−
switch off device
−
wait for the shutdown of the grinding wheel
−
pull out main plug
After each fault clearance, put into operation and recheck all security installations.
Fault Possible cause Remedy
Chain sharpener does not operate. Â no power
 Extension cable defect
Â
Main plug, motor or switch defect
 Check power supply, power socket and fuse
protection
 Check extension cable, exchange defect cable
immediately
Â
Have motor or switch checked by an approved
electrician or replaced by original spare parts
Chain sharpener grinds with interruptions Â
Extension cable defect
Â
Internal fault.
Â
ON/OFF button defective.
Â
Check extension cable, exchange defect cable
immediately
Â
Please contact the after sales service.
Â
Please contact the after sales service.
Grinding wheel becomes hot Â
Grinding wheel is dull or defective
Â
Replace grinding wheel
Motor is humming, grinding wheel stops
Â
Grinding wheel is blocked
Â
Remove object
Unusual vibrations
 Grinding wheel is defective  Replace grinding wheel