23
INSTALLING THE CAP ONTO THE SATELLITE ANTENNA DISH (CONTINUED)
14. Place the AZ/EL cap over the rectangular area on the back
of the antenna dish (see Figure 33). Make sure the cap
mount assembly screw holes are aligned with the antenna
cap mount holes, the elevation bolt is on the right, and that
the arrow labeled “TOP” points to the top of the antenna
dish. Make sure the part of the antenna that has a hole in its
rim is on the bottom.
15. Install four 7/16-inch self-tapping screws into the antenna
mount holes. Tighten the screws to 10 ft.-lbs.
CAUTION
To avoid stripping the screw threads, do not tighten the
self-tapping screws to more than 10 ft.-lbs.
Figure 30
Elevation Reference Mark
Figure 31
Figure 32
Elevation Reference Mark
Figure 33
