26
INSTALLING THE ANTENNA/CAP ASSEMBLY ONTO THE MAST
1. Using a 1/2-inch open-end wrench, loosen the three clamp
nuts and elevation pivot bolt nut so that the collar will be
able to slide over the mast or metal pole.
2. Lift the antenna/cap mount assembly and slide the AZ/EL
cap mount onto the mast tube or metal pole (see Figure 34).
The antenna should be facing toward the satellite.
3. Tighten the three clamp nuts so that the antenna/cap mount
assembly is held stationary on the mast but can be swiveled
with slight pressure. You may need to hold the clamp bolt
stationary with your left hand.
PARTS NEEDED
TOOLS NEEDED
• Dish assembly
• Mast
• 1/
2
-inch open-end wrench
Figure 35
Place AZ/EL cap
over mast or metal
pipe
Mast or metal pipe
To satellite
