Hughes 9201 User Manual Download Page 48

Page: 48 / 147

BGAN 9201 User Manual

TATISTICS

This web page provides an estimate of the amount of Packet Switched data sent and received
on background contexts, the time for streaming contexts and the time for CS calls. The data is
broken up into the following types:

Trip:

The trip counter is similar to the trip counter on your vehicle. It can be zeroed out at

anytime by the user and it will track the statistics until the User resets it.

Lifetime:

The Lifetime counter is similar to the odometer on your vehicle. It shows the statistics of

the terminal since the software version that added this feature was loaded onto the UT. The User

cannot

reset these counters.

CS Statistics also include the time of the latest call.

Note:

If the UT power is abruptly disconnected for some reason, the UT will not be able to

save the statistics to flash and hence the statistics for the session maybe inaccurate.

Summary of Contents for 9201




















































































































































Search results

Summary of Contents for 9201

Reviews:

Related manuals for 9201

Brands by name

Popular brands

Hughes 9201, User Manual

Search results

Summary of Contents for 9201

Reviews:

Related manuals for 9201

Brands by name

Popular brands