120
BGAN 9201 User Manual
The following screen appears:
Click on the radio button that says “Use the following IP address”
The static IP address information below should be entered:
IP Address:
192.168.128.101
Subnet Mask: 255.255.255.0
Default GW: 192.168.128.100
Click on OK to confirm the entries..
To verify the connection to the terminal, open a DOS command window and at the DOS prompt
try pinging the UT by typing “ping 192.168.128.100”. If you get 4 replies back, you know you have
connectivity to the UT.
Once you have connectivity to the UT, then you can use the Hughes Upgrader to load the latest
software into the UT.
