BGAN 9201 User Manual
13
P
OINTING THE
T
ERMINAL
You can use the BGAN terminal signal quality indicator lights for pointing if you know
approximately the direction to the BGAN satellite.
T
ERMINAL
S
TAND
P
OSITIONING
The terminal‟s stand is used to position the terminal in the correct direction.
1.
Place the Satellite Terminal on a flat surface. Find the knobs located on one side of the unit.
Loosen the knobs by rotating them both towards the unit, in the direction shown.
2.
To prepare to lift the Terminal, place a finger in the lower right hand corner of the unit and
place your other hand in the middle of the unit.
3.
Pull out the front stabilizer. Lay the Terminal back on the flat surface.
4.
Lift up the Terminal while referring to the protractor on the right-hand side. The protractor
gives you the angle at which the unit is positioned. Note that an angle of 0 to 45 degrees is
displayed on the inside portion of the protractor, while a 46 to 90 degree angle is displayed
on the outside portion. To start, select an angle between 15 and 30 degrees.
