BGAN 9201 User Manual
55
Always On Context
: To have the unit automatically set up a context on power up, set Always
on Context to On. The UT will set up the context at startup and reactivate it if it is ever
deactivated.
If the TE has a known
static IP address
or never ARPs, enter this address. Alternatively,
leave the IP address blank (0.0.0.0) and the UT will set up a context for the first device it
detects through ARP.
The
QoS
should be left as Background. Setting a steam QoS should only be used in
exceptional circumstances where a stream is required the whole time the unit is powered
on.
APN
will be filled in with the default value in the SIM but can be changed if necessary.
Fill in the
Username
and
Password
if required for context activation.
If you change the SIM card you may need to reconfigure your Always On Context settings, e.g. if
the APN or username or password is different between the two SIM cards.
For static units that are installed once the Point Once option on the Setup page is
recommended.
To control the unit remotely, use the SMS Remote Control feature – see the Features page and
SMS Remote settings.
