Hubner AMP 41, Operating And Assembly Instructions Manual

Page: 94 / 106

94 AMP(H)41_MANUAL-en_R11 - 2019-03-28
Absolute Encoder AMP(H) 41
16 Appendix
16.1 References
1.
IEC 61158
Digital data communications for measurement and control
- Fieldbus for use in industrial control systems
2.
IEC 61784
Digital data communications for measurement and control
- Fieldbus for use in industrial control systems
- Profile sets for continuous and discrete manufacturing
relative to fieldbus use in industrial control systems
3.
PROFIBUS
Guideline Planning Guideline
PNO order no.: 8.012
4.
PROFIBUS
Guideline Assembly Guideline
PNO order no.: 8.022
5.
PROFIBUS
Guideline Commissioning Guideline
PNO order no.: 8.032
6.
PROFIsafe
Guideline PROFIsafe – Environmental Requirements
PNO order no.: 2.232
16.2 Abbreviations and terms used
0x Hexadecimal representation
AMP 41 Absolute encoder with redundant dual scanning, solid shaft design
AMPH 41 Absolute encoder with redundant dual scanning, hollow shaft design
AMP(H) 41 Absolute encoder with redundant dual scanning, all designs
B35 Construction type with flange and foot
B5 Construction type with flange
CRC Cylic Redundancy Check
DC
avg
Diagnostic Coverage
Average diagnostic coverage
EC European Community
EMC Electro Magnetic Compatibility
Engineering
tool
Projection and commissioning tool
ESD Electro Static Discharge
F Generally stands for the term safety or fail-safe
F-Device Safety device for safety applications
Fault exclusion
Compromise between the technical safety requirements and the theoretical
possibility of an error occurring
F-Host Safety control for safety applications
FMEA
Failure Mode and Effects Analysis, reliability engineering methods, for
finding potential weak points
Functional
safety
Part of the overall system safety, which depends on the correct functioning of
safety-related systems for risk reduction. Functional safety is ensured when
each safety function is executed as specified.