manualshive.com logo in svg

Huawei X6000, User Manual, Page: 6 / 122

Share
Download
Huawei X6000 User Manual Download Page 6

4.5.1 Precautions.......................................................................................................................................................................... 46
4.5.2 Connecting a Power Cable............................................................................................................................................. 47
4.5.3 Connecting a Multi-Port Cable..................................................................................................................................... 49
4.5.4 Connecting an Optical Cable.........................................................................................................................................50
4.5.5 Connecting Ethernet Cables to Service and Management Network Ports....................................................52
4.5.6 Connecting the Aggregation Management Network Cable...............................................................................53
4.5.7 Laying Out Cables............................................................................................................................................................. 54
4.6 Verifying the Installation.................................................................................................................................................... 56
4.6.1 Verifying Device Installation.......................................................................................................................................... 56
4.6.2 Verifying Cable Connections.......................................................................................................................................... 56
4.6.3 Powering On the Chassis................................................................................................................................................ 57
4.6.4 Checking Device Operating Status.............................................................................................................................. 57

5 Configuring the X6000......................................................................................................... 59

5.1 Configuration Overview......................................................................................................................................................59
5.2 Default Data........................................................................................................................................................................... 59
5.3 Configuring the HMM......................................................................................................................................................... 60
5.3.1 Logging In to the HMM CLI........................................................................................................................................... 60
5.3.1.1 Logging In to the HMM CLI Through the Aggregation Network Port........................................................ 60
5.3.1.2 Logging In to the HMM CLI Through the Management Network Port of a Server Node................... 63
5.3.2 Changing the Initial HMM User Password............................................................................................................... 66
5.3.3 Configuring Basic HMM Data....................................................................................................................................... 67
5.4 Configuring a Server Node................................................................................................................................................ 68

6 Software and Hardware Compatibility............................................................................ 69
7 Internal Cabling.....................................................................................................................70
8 Troubleshooting.....................................................................................................................74
9 Electrostatic Discharge........................................................................................................ 75

9.1 Preventing Electrostatic Discharge................................................................................................................................. 75
9.2 Grounding Methods............................................................................................................................................................. 75

10 Warranty and Safety.......................................................................................................... 76

10.1 Warranty................................................................................................................................................................................ 76
10.2 Safety...................................................................................................................................................................................... 76

11 Product Specifications........................................................................................................77

11.1 Chassis Specifications........................................................................................................................................................ 77
11.2 Server Node Specifications..............................................................................................................................................78
11.3 Power Specifications..........................................................................................................................................................78
11.4 Physical and Environmental Specifications................................................................................................................79

12 Common Operations.......................................................................................................... 81

12.1 Logging In to the Server Node iBMC WebUI and CLI............................................................................................81
12.1.1 Logging In to the iBMC CLI or WebUI of a Server Node Through the iBMC Management Network

Port....................................................................................................................................................................................................81

TaiShan X6000 Server

User Guide

Contents

Issue 04 (2020-06-05)

Copyright © Huawei Technologies Co., Ltd.

v

Summary of Contents for X6000



























































































































Reviews:

No comments