Huawei V100R001C50, User Manual

Page: 23 / 85

Advanced Cooling Controller
User Manual
3 Power-on Commissioning
Issue Draft A (2014-12-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
Step 2
Set SNMP Version based on site requirements, and then click Submit .

If you set SNMP Version to ALL or SNMP V1&V2 , you can set Read Community and
Write Community by performing Step 3 . Read Community and Write Community
are respectively set to sread and swrite by default. You can modify the settings by
following instructions provided in Step 3 .

If you set SNMP Version to ALL or SNMP V3 , you can add SNMP V3 users by
performing Step 4 .
Step 3
Set Read Community and Write Community .
1. Click the text box after Read Community , as shown in Figure 3-10 . Set Read
Community as planned, click , and then click Submit .
Figure 3-10 Setting read community
2. Click the text box after Write Community , as shown in Figure 3-11 . Set Write
Community as planned, click , and then click Submit .
Figure 3-11 Setting write community
Step 4
Add an SNMPv3 user.
1. Click Add under SNMP V3 .
2. Enter a planned value for User Name , select values for Auth. Protocol and Prop.
Protocol from drop-down list boxes, and click , as shown in Figure 3-12 .