SmartLogger1000
User Manual
6 User Interface
Issue 12 (2019-01-15)
Copyright © Huawei Technologies Co., Ltd.
146
LCD
Operation Procedure
18. Choose
Batch Reset
and press
to
confirm the batch reset operation.
----End
6.2.35 Clearing Data
This topic describes how to delete alarm and performance data on the monitoring panel.
Context
Clear data if the SmartLogger location changes and its historical data need to be deleted.
After the data clear operation is performed, all information stored on the SmartLogger,
including energy yield, performance data, and alarms, will be removed.
After the data clear operation is performed, the devices connected to the SmartLogger are
not removed. If an original device will not connect to the SmartLogger, remove the device.
If you perform
Data Clear
on the SmartLogger, you also have to perform
Alarm Reset
on
the NMS. Otherwise, the alarm information collected by the NMS and SmartLogger will
be different.
Procedure
The following table describes the procedure for clearing data. The parameter values in
the figures are for reference only.