FusionModule1000A40 Prefabricated All-in-One Data
Center
Installation Guide
4 Installing Pre-fab. Modules
Issue 03 (2020-06-09)
Copyright © Huawei Technologies Co., Ltd.
20
Figure 4-4
Installing an expansion bolt (unit: mm)
(A) Nut
(B) Spring washer
(C) Flat washer
(D) Wooden block
4.
Secure angle steel brackets.
a.
Reinstall the angle steel brackets to the concrete platforms with the expansion bolts
securing the angle steel brackets. Remount the flat washers, spring washers, and
nuts on the expansion bolts and tighten the expansion bolts in sequence using a
torque wrench.
b.
Secure the angle steel brackets to the pre-fab. module using bolt assemblies.
Figure 4-5
Securing an angle steel bracket
----End