FusionModule1000A40 Prefabricated All-in-One Data
Center
Installation Guide
7 Removing Transport Protection Materials
Issue 03 (2020-06-09)
Copyright © Huawei Technologies Co., Ltd.
47
Step 2
Remove the sliding base fasteners for other cabinets inside the pre-fab. module in the same
way.
----End
7.3 Removing Sliding Door Fasteners
Prerequisites
The pre-fab. modules have been installed.
Preparations
Tool: adjustable wrench
Materials: none
Documents: none
Skill requirement: common technician
Context
The three hot aisle sealing doors and the door between the entrance hall and the equipment
compartment in a pre-fab. module are all glass sliding doors. Fasteners are installed on the
glass sliding doors to prevent the doors from being damaged during transportation.
After pre-fab. modules are installed and secured, the fasteners need to be removed so that the
sliding doors can work properly.
Keep the removed sliding door fasteners for future use in case the pre-fab. modules need to be relocated.
Procedure
Step 1
Remove the bolts from the sliding door fasteners using an adjustable wrench, and remove the
sliding door fasteners.
