Johnson Controls DVN 5000, Быстрый старт

Страница: 1 / 2

Step
1
Step
2
□
Unpack the equipment.
□
Insert hard drives into drive slots as shown
below.
a
□
Press each drive until it clicks and the handle is
held behind the release button.
a
□
Connect to VGA monitor.
c
□
Connect mouse and keyboard.
c
□
Connect AC Power.
d
□
Connect to network.
c
□
Connect analog cameras.
c
Step
3
□
Turn on the main power on the
back of the DVN.
e
□
Press the power switch on the
front of the DVN.
e
Main Power Switch
1
2
5
3
4
Please read before installation
2
3
6
4
5
3
MOUSE
□
Check for damage.
□
Mount the DVN in a 19 ‐ inch rack,
if applicable, using the rack shelf
or an optional sliding rail.
b
x
(back view)
6
PAGE 1
24 ‐ 10520 ‐ 14 Rev. A
Important: For complete installation instructions,
refer to the DVN 5000 Rackmount Series
Installation Guide .
0
1
2
3
System
e. See “Switching the Server On and Off” in the
DVN 5000 Rackmount Series Installation Guide
(Part Number 24
‐ 10129 ‐ 4) .
b. Refer to the DVN 5000 Storage, Shipping, and Environmental Guidelines
(Part Number 24 ‐ 10520 ‐ 22) .
c. See “Cable Connections Scheme” in the DVN 5000 Rackmount Series
Installation Guide (Part Number 24 ‐ 10129 ‐ 4) .
d. See “Connecting the Power” in the DVN 5000 Rackmount Series Installation
Guide (Part Number 24 ‐ 10129 ‐ 4) .
a. See “Inserting the RAID Drives and System Drive in the Drive Bay” in the
DVN 5000 Rackmount Series Installation Guide (Part Number
24
‐ 10129 ‐ 4) .