HTC CLIO100, User Manual

Page: 103 / 124

Securing and Managing the Mobile Computer 103
To run the System Wizard
1. Tap the VitaKey icon in the system tray.
2. The System Wizard opens. Tap Next .
3.
Tap
Create new User Data File
and tap
Next
.
4. Enter your Windows login password and tap Next .
5.
Next, you are prompted to enroll your fingerprints. Select which
fingerprint you want to enroll by tapping the corresponding finger on
the screen.
6. After selecting a finger to enroll, you are prompted to swipe your
finger across the fingerprint sensor.
Slide your finger across the sensor. Successful reads are accompanied
by a sound and the numbered boxes below change to a fingerprint
symbol.
7.
Repeat this procedure at least four times to register your fingerprint.
When you have successfully registered, you are prompted to enroll
another fingerprint.
8. Select another finger to enroll and repeat the previous steps, or tap
Next
to continue.
9. Select a location on the hard disk to store a backup user data file.
10. Tap Next and then tap OK .
11.
Tap
Finish
. A User Data File is then created which stores your enrolled
fingerprint(s).
Authentication
After enrolling one or more of your fingerprints, VitaKey will prompt for
fingerprint authentication whenever you log onto Windows in your Mobile
Computer. Swipe a finger that has an enrolled fingerprint on the fingerprint
sensor to log onto Windows.
Fingerprint authentication is also required before you are allowed to
change VitaKey settings, protect/unprotect files or use certain functions.
When you see VitaKey’s Authentication window, swipe your enrolled finger
over the fingerprint sensor.