7.
If the cache module is covered by an air scoop, remove the air scoop.
8.
Disconnect the cache module backup power cable from the cache module.
9.
Remove the cache module.
1
1
2
To replace the component, reverse the removal procedure.
Replacing the fan module
About this task
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
Procedure
1.
If installed,
.
.
3.
Remove all power:
Replacing the fan module
41
Summary of Contents for ProLiant DL20
