HPE ProLiant DL20, Maintenance And Service Manual

Page: 32 / 109

Replacing the non-hot-plug drive carrier
About this task
CAUTION:
To prevent improper cooling and thermal damage, do not operate the sever unless all bays are
populated with either a component or a blank.
Procedure
1. If installed, remove the security bezel .
2. Power down the server .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Remove the drive carrier.
1
2
3
To replace the component, slide the component into the bay until it clicks.
32 Replacing the non-hot-plug drive carrier