Replacing the hot-plug drive blanks
About this task
CAUTION:
To prevent improper cooling and thermal damage, do not operate the sever unless all bays are
populated with either a component or a blank.
Procedure
1.
If installed,
.
2.
Remove the drive blank.
1
2
To replace the drive blank, slide the component into the bay until it clicks.
Replacing the hot-plug drive
About this task
CAUTION:
To prevent improper cooling and thermal damage, do not operate the sever unless all bays are
populated with either a component or a blank.
Procedure
1.
Back up all server data on the drive.
2.
If installed,
.
3. Determine the status of the drive from the drive LED definitions
4.
Remove the hot-plug drive.
1
2
34
Replacing the hot-plug drive blanks
Summary of Contents for ProLiant DL20
