manualshive.com logo in svg

HP ZBook Studio G 315-ap000 - 15ap099, Maintenance And Service Manual, Page: 159 / 185

Share
Download
HP ZBook Studio G 315-ap000 - 15ap099 Maintenance And Service Manual Download Page 159

Using HP Sure Start (select products only)

Select computer models are configured with HP Sure Start, a technology that monitors the computer's BIOS 
for attacks or corruption. If the BIOS becomes corrupted or is attacked, HP Sure Start automatically restores 
the BIOS to its previously safe state, without user intervention.

HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default 
configuration. The default configuration can be customized by advanced users.

To access the latest documentation on HP Sure Start, go to 

http://www.hp.com/support

, and select your 

country. Select Drivers & Downloads, and then follow the on-screen instructions.

Using HP Sure Start (select products only) 145

Summary of Contents for ZBook Studio G 315-ap000 - 15ap099


























































































































































































Reviews:

No comments