manualshive.com logo in svg

HP ZBook Studio G 315-ap000 - 15ap099, Maintenance And Service Manual, Page: 116 / 185

Share
Download
HP ZBook Studio G 315-ap000 - 15ap099 Maintenance And Service Manual Download Page 116

No or bad external video via docking

 

 

Symptoms

No or bad image on external monitor 
via ports of docking station (VGA, DP, 
TB, display port, etc.)

Possible causes

Rooted from system board, software/drivers, dock connectors, docking station hardware/
firmware, dock video ports (DP, VGA, etc).

 

Troubleshooting steps

1.

Be sure that external monitor is powered on.

2.

Be sure that external monitor is compatible with the computer.

3.

If applicable, plug the dock in different Type-C ports.

For more information, see the technical white paper titled ”HP ZBook 65/150/200 W 
Thunderbolt 3 Dock User Guide.” Go to 

http://support.hp.com/

, enter your model 

number, and then click Manuals > Technical white papers.

4.

If the screen image is distorted, try a DP-to-VGA adapter. Connect the adapter to each 
DisplayPort and VGA port of the dock.

5.

Test the monitor via internal ports (VGA, DP, HDMI, etc.).

6.

Verify that dock connectors of the notebook and the dock are clean, without dust, 
debris (e.g., using air duster).

7.

Ideally, use a verified working operating system/system connected to the dock to 
isolate the issue of the current operating system.

8.

Ideally, use a verified working docking station to isolate the faulty dock.

9.

Update latest dock firmware. Be sure to follow the installation instructions carefully. 
You may want to try a DP-to-VGA adapter if you have a distorted screen image. Connect 
the adapter to each DisplayPort of the dock. If you still cannot update the dock, 
attempt to update it on a confirmed working notebook before having the dock 
replaced.

Note

See the technical white paper titled “Multiple displays on HP ZBook Mobile Workstations” 
from HP platform support website. Go to 

http://support.hp.com/

, enter your model number, 

and then click Manuals > Technical white papers.

Incorrect or missing color/distorted image

 

 

Symptoms

System works normally but the display 
shows:

●

Missing or strange color

●

Image distortion

Possible causes

Loose connection, display cable, display, graphics card.

Troubleshooting steps

Verify with external monitor (i.e., VGA)

1.

Use combination 

Fn + F4

 to enable output to external monitor.

2.

Close the lid.

If the external monitor also shows incorrect color, it is graphics card issue. Test with a 
verified working graphics card.

 

Verify display cable and cable connection–Display disassembly is required.

Be sure that external display cables are not pinched or damaged.

102 Chapter 7   Troubleshooting guide

Summary of Contents for ZBook Studio G 315-ap000 - 15ap099


























































































































































































Reviews:

No comments