manualshive.com logo in svg

HP ZBook Studio G 315-ap000 - 15ap099, Maintenance And Service Manual, Page: 124 / 185

Share
Download
HP ZBook Studio G 315-ap000 - 15ap099 Maintenance And Service Manual Download Page 124

Smart card reader

 

 

Symptoms

●

Not recognized

●

Unable to write

Possible causes

Physical damage, incorrect insertion, dirt, driver, malfunctioning card reader.

NOTE:

Some cards have a read/write security switch on the card. Make sure that 

switch is set to “write enabled” before attempting to write data to it.

Card Reader Removal Policy

Troubleshooting steps

1.

Verify card reader removal policy.

2.

Make sure there is no physical damage to the card.

3.

Inspect the ends of the memory cards for dirt or material closing a hole or 
spoiling a metal contact. Clean the contacts with a lint-free cloth and small 
amounts of isopropyl alcohol. Replace the memory card if necessary.

4.

Reinstall and update the drivers for the card reader.

5.

Make sure the smart card reader is compliant with ISO 7816 Class A, B, and C.

6.

Reinsert the card reader with correct face as described in its documentation.

7.

Check reader function with a verified working card.

 

CAUTION:

If the card reader has an in-use indicator light, do not insert or remove 

memory cards while the light is flashing. Doing so may cause loss of data on the card 
or may permanently damage the card reader.

110 Chapter 7   Troubleshooting guide

Summary of Contents for ZBook Studio G 315-ap000 - 15ap099


























































































































































































Reviews:

No comments