manualshive.com logo in svg

HP ZBook Studio G 315-ap000 - 15ap099, Maintenance And Service Manual, Page: 11 / 185

Share
Download
HP ZBook Studio G 315-ap000 - 15ap099 Maintenance And Service Manual Download Page 11

Stuck power button ......................................................................................................  120

Additional information ......................................................................................................................................  121

Acronyms ......................................................................................................................................... 121
Blinking lights and boot error codes ............................................................................................... 122

Processor not executing code ......................................................................................  122
BIOS recovery code unable to find valid BIOS recovery image ..................................... 122
Memory module error ................................................................................................... 122
Graphics Controller Error (No Controller) .....................................................................  123
Failure - System Board Error ........................................................................................  123
Intel Trusted Execution Technology (TXT) Error ..........................................................  123
Sure Start unable to find valid BIOS Boot Block image ................................................  123
Sure Start has identified a problem (Manual Recovery Policy Set) .............................. 124

POST Error Messages and User Actions .......................................................................................... 124
Routine Maintenance for Performance Improvement .................................................................... 126
Common Blue Screen Error Messages ............................................................................................  126

Error message list ......................................................................................................... 126
Bug check symbolic names ........................................................................................... 126
Microsoft general troubleshooting of Windows bug check codes ............................... 127

Use Windows Debugging Tool ......................................................................................................... 127

Windows Software Development Kit (SDK) .................................................................. 128

Display Issue: Pixel Anomalies ........................................................................................................ 132
Cable management .........................................................................................................................  133
Connector types ..............................................................................................................................  134

8  Computer Setup (BIOS), TPM, and HP Sure Start in Windows 7 ........................................................................ 136

Using Computer Setup ....................................................................................................................................... 136

Starting Computer Setup ................................................................................................................  136
Navigating and selecting in Computer Setup .................................................................................  136
Restoring factory settings in Computer Setup ...............................................................................  137
Updating the BIOS ...........................................................................................................................  138

Determining the BIOS version ......................................................................................  138
Downloading a BIOS update .........................................................................................  138

Changing the boot order using the f9 prompt ................................................................................ 139

TPM BIOS settings (select products only) .........................................................................................................  139
Using HP Sure Start (select products only) .......................................................................................................  140

9  Computer Setup (BIOS), TPM, and HP Sure Start in Windows 10 ...................................................................... 141

Using Computer Setup ....................................................................................................................................... 141

Starting Computer Setup ................................................................................................................  141
Navigating and selecting in Computer Setup .................................................................................  141
Restoring factory settings in Computer Setup ...............................................................................  142

xi

Summary of Contents for ZBook Studio G 315-ap000 - 15ap099


























































































































































































Reviews:

No comments