manualshive.com logo in svg

HP ZBook Studio G 315-ap000 - 15ap099, Maintenance And Service Manual, Page: 123 / 185

Share
Download
HP ZBook Studio G 315-ap000 - 15ap099 Maintenance And Service Manual Download Page 123

USB

 

 

Symptoms

●

USB devices are not recognized

●

USB devices are not charging

Possible causes

USB devices do not have the latest software drivers, port insufficient power, or not 
compliant.

NOTE:

USB Type-C uses a different connector entirely

Examples of USB device Not Recognized

Troubleshooting steps

1.

Unplug USB device and/or restart the computer (wait for 2-5 minutes) to reset USB 
port/hub in case of power surge.

2.

Soft Reset (

9. Soft reset (Default Settings) on page 75

) and verify if USB device is 

recognized.

3.

Verify if USB device is recognized in Device Manager > Universal Serial Bus 
Controller, or USB is recognized without Yellow bang.

4.

Verify if the latest USB driver or/and USB chipset driver are installed. USB driver 
could be removed and reinstalled.

5.

Make sure USB device is supported, for example, USB 3.0 device requires more 
power drawn (0.9A) from USB port than USB 2.0 device (0.5A). As a result, identify 
USB charging port to be used for charging a USB device, or an external AC power 
adapter may be required for an external USB storage to work properly.

6.

Test with verified working USB devices (keyboard, mouse, USB key) to make sure 
USB ports are functional.

7.

Test USB device on a verified working computer to make sure USB device is not 
malfunctioning.

Common issues and possible solutions 109

Summary of Contents for ZBook Studio G 315-ap000 - 15ap099


























































































































































































Reviews:

No comments