manualshive.com logo in svg

HP ZBook Fury 17 G7, Maintenance And Service Manual, Page: 69 / 232

Share
Download
HP ZBook Fury 17 G7 Maintenance And Service Manual Download Page 69

Table 5-9

  Keyboard description and part number (continued)

For use in country/region

Spare part number

For use in country/region

Spare part number

For use in Italy

M20128-061

For use in Turkey-F

M20128-541

For use in Japan

M20128-291

For use in Ukraine

M20128-BD1

For use in Latin America

M20128-161

For use in the United Kingdom

M20128-031

For use in the Netherlands

M20128-B31

For use in the United States

M20128-001

For use in Northwest Africa

M20128-FP1

Before removing the keyboard, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 66

).

2.

Remove the service cover (

Service cover on page 40

).

3.

Remove the battery (see 

Battery on page 41

).

Remove the speakers:

1.

Remove the three Phillips M2.5 × 6.0 screws (1), identified by the keyboard icon (2), that secure the 
keyboard to the computer.

2.

Release the zero insertion force (ZIF) connector (3) to which the pointing stick cable is connected, and then 
disconnect the cable from the connector.

ENWW

Component replacement procedures

55

Summary of Contents for ZBook Fury 17 G7









































































































































































































































Reviews:

No comments