manualshive.com logo in svg

HP ZBook Fury 17 G7, Maintenance And Service Manual, Page: 125 / 232

Share
Download
HP ZBook Fury 17 G7 Maintenance And Service Manual Download Page 125

NOTE:

HP recommends that you reset BIOS before trying BCU. Resetting the BIOS is always available and 

relatively quick to try, whereas BCU takes extra time and effort.

HP Image Diagnostic Tool

Available to HP Authorized Support Partners (ASPs) and users, this tool collects information about the current 
state of the computer, including product serial number, platform and BIOS information, and information about 
user-installed software and hardware components.

Access this tool at 

ftp://ftp.hp.com/pub/idr/ImageDiags/

. HP encourages you to review the report before sending 

it to support. The report may assist you with diagnostics and solutions to problems you encounter.

HP Thermal Monitor

You can use HP Thermal Monitor to stress the processor and GPU and monitor the temperature values of various 
components in the system.

NOTE:

Available only to authorized service providers and technicians.

The components that are currently monitored include the processor, GPU, ACPI thermal zones, hard drive, and 
battery. The tool reads the temperatures of the components, logs the data, and helps to determine whether the 
computer would overheat in the event of thermal shutdown, fan spinning loud, and so on.

Non HP diagnostics tools

Refer to the following diagnostic tools for troubleshooting help.

Windows-to-Go USB

Windows-To-Go USB is a Microsoft-based tool for Enterprise editions of Windows that can help in 
troubleshooting. You can find a process online about how to create a live Windows USB drive. For more 
information, see 

https://technet.microsoft.com/en-us/library/hh831833.aspx

.

Intel Processor Diagnostic Tool

Determine what processor is in your computer and verify the processor operating frequency. The tool also tests 
specific processor features and performs a stress test on the processor. For more information, see 

http://www.intel.com/support/processors/sb/CS-031726.htm?iid=tools_procdiagtool

.

ENWW

General troubleshooting steps 111

Summary of Contents for ZBook Fury 17 G7









































































































































































































































Reviews:

No comments