HP ZBook Fury 17 G7 Maintenance And Service Manual Download Page 151

Page: 151 / 232

Table 7-20

Issues, possible causes, and fixes

Items

Procedures

Symptoms

●

Has power, light activity, fan spinning

●

HP Logo displays briefly

●

Attempt to boot to operating system and
freeze/hang at Windows logo

●

No response to pressing

num lk

caps

lock

key

Possible causes

Conflict of instructions from multiple programs or drivers; installing a new hardware or
program that is not compatible (may also cause a blue screen error—see blue screen
issue).

Troubleshooting steps

Perform the following steps one at a time to verify normal boot process:

Disconnect all external peripherals, and perform a hard reset (

8. Hard reset

on page 115

Perform soft reset (

9. Soft reset (Default Settings) on page 116

Update BIOS and drivers (

4. Update BIOS and drivers on page 107

Roll back to previous version may be necessary.

Go to safe mode to install drivers.

Run Hardware Diagnostics (

6. HP Hardware Diagnostics and Tools on page 109

)

to isolate hardware issue.

Undo recent changes in Windows (

5. Remove or uninstall recently added

hardware, software on page 108

Reseat cables and connections (

10. Reseat cables and connections

on page 116

Start Windows in safe mode (

11. Test with minimum configuration on page 118

Use Startup Repair Windows to fix Windows damaged files.

Test with essential hardware configuration (

11. Test with minimum

configuration on page 118

) with a verified working operating system (for

instance, USB Windows-To-Go), if available, to isolate the software issue.

Tips

For more information, see

http://support.hp.com/us-en/document/c03671001

Electromagnetic Interference (EMI)

Use this information to troubleshoot EMI issues.

ENWW

Common issues and possible solutions 137

Summary of Contents for ZBook Fury 17 G7









































































































































































































































Search results

Summary of Contents for ZBook Fury 17 G7

Reviews:

HP ZBook Fury 17 G7, Maintenance And Service Manual, Page: 151 / 232

Search results

Summary of Contents for ZBook Fury 17 G7

Reviews: