manualshive.com logo in svg

HP ZBook Fury 17 G7, Maintenance And Service Manual, Page: 36 / 232

Share
Download
HP ZBook Fury 17 G7 Maintenance And Service Manual Download Page 36

Table 3-1

  Computer major component descriptions and part numbers (continued)

Item

Component

Spare part number

For use in Romania

M20128-271

For use in Russia

M20128-251

For use in Saudi Arabia

M20128-171

For use in Slovenia

M20128-BA1

For use in South Korea

M20128-AD1

For use in Spain

M20128-071

For use in Sweden and Finland

M20128-B71

For use in Switzerland

M20128-BG1

For use in Taiwan

M20128-AB1

For use in Thailand

M20128-281

For use in Turkey

M20128-141

For use in Turkey-F

M20128-541

For use in Ukraine

M20128-BD1

For use in the United Kingdom

M20128-031

For use in the United States

M20128-001

(3)

Top cover

M20107-001

(4a)

Touchpad:

NOTE:

The touchpad spare part kit does not include the touchpad bracket or touchpad cable. The touchpad bracket is not 

available as a spare part. The touchpad cable is available in the Cable Kit, spare part number M20105-001.

For use only on computer models equipped with NFC capability (includes NFC antenna)

M38137-001

For use only on computer models not equipped with NFC capability

M36390-001

(4b)

Touchpad bracket: The touchpad bracket is not available as a spare part.

(4c)

Touchpad cable: The touchpad cable is available in the Cable Kit, spare part number M20105-001.

(5)

Speakers (includes three rubber isolators)

M17067-001

Memory module compartment cover (includes thermal material): Included in the Bracket Kit, spare part number M20094-001.

(6a)

Memory module compartment cover under keyboard

(6b)

Memory module compartment cover under service cover

Solid-state drive cover (includes thermal material): Included in the Solid-state Drive Hardware Kit, spare part number 
M20090-001.

(7a)

Solid-state drive cover under keyboard

(7b)

Solid-state drive cover under service cover

(8)

Beam connector (includes plastic installation tool and replacement thermal material)

M25737-001

(9)

System board (includes integrated processor):

NOTE:

All system board spare part kits include the processor, the RTC battery, and replacement thermal material.

22

Chapter 3   Illustrated parts catalog

ENWW

Summary of Contents for ZBook Fury 17 G7









































































































































































































































Reviews:

No comments