manualshive.com logo in svg

HP ZBook Fury 17 G7, Maintenance And Service Manual, Page: 158 / 232

Share
Download
HP ZBook Fury 17 G7 Maintenance And Service Manual Download Page 158

Quick check

Use these steps to check the display.

●

Visually examine the display for cracked screen, liquid crystal leak, dirty spots on glass, and other issues.

●

Reset and update BIOS and docking firmware.

●

Update operating system (OS), graphics or video drivers (Intel, AMD, NVIDIA, and others).

For custom images, HP highly recommends upgrading or installing Windows in UEFI mode (or Legacy 
disabled) to fully support hybrid graphics and avoid unexpected behaviors (for example, blue screen error, 
graphics or video issues) in the BIOS Legacy setting.

●

Configure Windows settings (Power options, Screen brightness, Personalization, Screen resolution, and so 
on).

●

Test with a verified working external display.

●

Boot to Windows in safe mode.

●

Test with a verified working operating system (for instance, shipping image).

HP PC Hardware Diagnostics (UEFI) for video test

Use this tool to quickly determine if the display issue is related to a real hardware issue.

To start HP PC Hardware Diagnostics (UEFI) (

6. HP Hardware Diagnostics and Tools on page 109

), when the 

computer is at boot, press the 

f2

 key, select Component Tests, and then select Video.

There are three options:

●

Video Memory Check: to test video memory

●

Palette Check: to test the three video color components (red, green, blue)

●

Dead Pixel Check: to check dead pixels in eight different colors (Dead Pixel Check is available with the HP PC 
Diagnostics 3-in-1 USB Key tool)

Review the video troubleshooting in the following Display section for specific issues and possible solutions. For 
additional information about display problems, see documentation provided by the product manufacturer.

Display assembly diagram

The display assembly diagram shows basic video components: system board, graphics cards, display cables, 
display connectors, operating system (OS), graphics driver, and LCD display panel. Any component or a 
combination of these components can contribute to a video issue.

144 Chapter 7   Troubleshooting guide

ENWW

Summary of Contents for ZBook Fury 17 G7









































































































































































































































Reviews:

No comments