HP Vectra VEi 7, Supplementary Manual

Page: 41 / 80

2
How to Install and Upgrade
Accessories In Your PC
This chapter explains in detail how to install accessories, such as extra
memory, accessory boards, and additional disk drives, in your PC. For
information about supported accessories, refer to HP’s Web site at:
www.hp.com/go/pcaccessories
.
VEi 8
(Pentium models)
VEi 7
(Celeron models)
One or Two Free Front-
Access Device Shelves:
CD-ROM drive (already installed
on some models), DVD, Tape or
ZIP drive
One or Two Free Front-
Access Device Shelves:
CD-ROM drive (already installed
on some models), DVD, Tape or
ZIP drive
Main Memory Modules:
(100 MHz SDRAM only)
32 MB kit
64 MB kit
128 MB kit
256 MB kit
Main Memory Modules:
100 MHz SDRAM only)
32 MB kit
64 MB kit
128 MB kit
256 MB kit
Up to Four Accessory
Board Slots:
Some slots may come
with pre-installed boards
such as a network adapter
Up to Four Accessory
Board Slots:
Some slots may come
with pre-installed boards
such as a network adapter
Hard Disk Drive:
You can replace this drive
with a larger one
Hard Disk Drive:
You can replace this drive
with a larger one
Video Memory Module