HP Vectra VEi 7 Supplementary Manual Download

Page: 29 / 80

1 Troubleshooting Your PC

If Your PC Has a Software Problem

Problem

Solution

Power indicator light is
illuminated, but some
software won’t run.

•

Refer to the application software documentation and/or the operating
system documentation for guidance.

•

If the software is running but not functioning properly, try to save any
unsaved data, then close down the application and relaunch it. If it still does
not work, restart the PC and then try launching the software again.

•

Reinstall the software.

•

If the problem continues, contact the software manufacturer’s support
services.

Date and time are wrong.

The date and time can be incorrect for the following reasons:

•

The time has changed to or from Summer Time.

•

The PC has been unplugged from the power too long, and the battery is
discharged.

To change the date and time, use your operating system utilities or the

Setup

program. If necessary, install a new battery (refer to page 63).

Your PC often hangs
(becomes unusable) when
running applications under
Windows NT 4.0.

You need at least 64MB of RAM to run Windows NT 4.0 on your PC. Install
more memory if required.

Summary of Contents for Vectra VEi 7

















































































Search results

Summary of Contents for Vectra VEi 7

Reviews:

Related manuals for Vectra VEi 7

Brands by name

Popular brands

HP Vectra VEi 7, Supplementary Manual

Search results

Summary of Contents for Vectra VEi 7

Reviews:

Related manuals for Vectra VEi 7

Brands by name

Popular brands