HP t5565 - Thin Client Administrator'S Manual Download

Page: 32 / 69

Click

Next

to continue.

Set the appropriate RDP options:

Table 3-39

New VMWare View Connection RDP Settings

Option

Description

Sound redirection

Enable sound redirection

Valid options are:

off

local

and

remote

Device mappings

Enable USB storage
mapping

The assigned drive letter should be chosen from the drop-down list.

Enable port mapping

Allow the mapping of local ports to the remote system.

Enable printer mapping

Allow the mapping of local printers to the remote ystem.

Click

Next

to continue.

Set the appropriate advanced options (refer to

Table 3-9 New Connection Advanced Settings

on page 10

Click

Finish

to save your settings and close the dialog box.

To start a desktop connection using PCoIP instead of RDP:

Click

Connections

Add

Select a connection in the

Connections

window and click

Connect

Type the host name of IP address of the View Connection Server in the field, if necessary.

Type the user name, password, and domain names in the corresponding fields and click

Connect

Click the arrow on the right side of the Desktop pool. Select

Protocols

PCoIP

Click

Connect

NOTE:

To set PCoIP as the default protocol or to disable user protocol selection, edit the

desktop/pool settings in the

VMware View Manager

window (http://<Server>/admin).

NOTE:

To set PCoIP as the default protocol or to disable user protocol selection, edit the desktop/

pool settings in the

VMware View Manager

window (http://<server>/admin).

NOTE:

To enable VMware View USB Redirection, use the USB Manager utility. See

USB Manager

on page 38

for instructions.

Xdmcp

XDMCP is a way to connect directly to remote X servers. X servers are used to display graphics on
most UNIX-like operating systems, such as Linux, Berkeley Software Distribution (BSD), and Hewlett
Packard UniX (HP-UX).

Chapter 3 Reference

ENWW

Summary of Contents for t5565 - Thin Client






































































Search results

Summary of Contents for t5565 - Thin Client

Reviews:

Related manuals for t5565 - Thin Client

Brands by name

Popular brands

HP t5565 - Thin Client, Administrator'S Manual

Search results

Summary of Contents for t5565 - Thin Client

Reviews:

Related manuals for t5565 - Thin Client

Brands by name

Popular brands