manualshive.com logo in svg

HP StorageWorks 8000, User Manual

Share
Download
HP StorageWorks 8000 User Manual Download Page 200

Integrating with Network Backup Applications

200

Using Legato NetWorker

NetWorker is a network based, backup and recovery tool.

You can use NetWorker on either a Windows NT or UNIX system connected to 
your NAS server.

Note:  

When you back up with a remote server, you cannot use a tape device local to 

the NAS server.

Networker for Windows

1. Select Start > Programs > Networker Group > Network User.

2. Select Backup.

3. Expand the network and find the NAS server. Expand the volumes. You can 

only back up Windows shared volumes that have been mapped to the backup 
server.

4. Select the files, directories, or volumes you want to back up.

5. Select your backup options as you normally would, then start the backup.

Networker for UNIX

Before you can backup with Networker, you must:

■

Mount on your local host machine the NAS server volumes you want to back 
up.

■

Configure the NAS server so that the UNIX backup system is set to a trusted 
host on the NAS server.

To back up files from the NAS server using Networker for UNIX:

1. Execute 

/opt/networker/bin/nwbackup

.

2. Select Backup, Archive, & Restore.

3. Click Select for Backup.

4. Expand the network and find the NAS server. Expand the volumes. You can 

only back up NFS mounted volumes.

5. Select a volume and click Backup > Start Backup of selected files and 

directories.

Summary of Contents for StorageWorks 8000













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands