HP StorageWorks 8000, User Manual

Page: 131 / 268

Managing Your Storage
131
Managing Group Quotas
To view and edit group quotas on the NAS server:
1. In the Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas.
3. In the table that appears in the main window, expand the file volume for which
you want to configure a quota.
4. Double-click Group Quotas - Default to display a list of groups that have
settings other than the default. The table listing displays the following
information for each individual group quota:
— Group associated with the quota
— Space consumed by the group
— Soft limit of the quota disk space that you can temporarily exceed before
cleaning up
— Hard limit of the quota disk space that cannot be surpassed by the user
— Grace period of the quota
— Email address of person to notify about exceeding space limitations
You can refresh the information in the table by clicking Actions > Refresh.
Managing a Group Default Quota
To edit Group Quotas - Default settings:
1. In Command View NAS, click the Storage tab.
2. Under File Volumes, select Quotas.
3. Expand the desired file volume.
4. Select Group Quotas - Default.
5. Select Actions > Manage Group Default Quota.
6. Either check the No Space Limit box, or uncheck the box and type in values
for the soft and hard limits.
7. Set the grace period in increments of days, hours, or minutes.
8. Click OK to save the changes.
Note: Only one grace period can be set per file volume. Therefore, the same grace
period applies to both the default group settings and each group.