HP StorageWorks 1510i - Modular Smart Array, User Manual, Page: 120 / 160

Message Type
Description Action
121 NO VOLUMES
DETECTED
Informational
No con fi gured volumes were
detected at power-up.
If there are supposed to be
con fi gured volumes, power off the
MSA and then all attached storage
enclosures. Unplug and reinsert all
SCSI hard drives ensuring they are
fully seated in their bays. Check
the cables connecting the MSA to
any attached storage enclosures.
Power on the attached enclosures
and then the MSA.
122 NEW VOLUME(S)
DETECTED
Informational
Con fi gured volumes from another
array controller were migrated
to this array controller. The
con fi guration information has been
updated.
123 TOO MANY
VOLUMES DETECTED
Error
The array controller supports
a maximum of 32 con fi gured
volumes. More than 32 volumes
were detected at power up. This
typically occurs when migrating
a set of volumes from one
array controller to a different
array controller that already has
con fi gured volumes on it. The
migrated volumes have not been
added.
Remove the migrated volumes and
run the HP Storage Management
Utility or MSA-CLI. Delete any
unneeded volumes until the
number of existing volumes plus
the number of migrated volumes is
32 or less.
124 SPARES CLEARED
Informational
A set of volumes has been
migrated from one array controller
to a different array controller that
already has con fi gured volumes
on it. The migrated volumes have
spares de fi ned for them that con fl ict
with the existing con fi guration. The
de fi ned spares have been deleted
so as to allow the migration to
proceed.
Run the Storage Management
Utility (SMU) or MSA Command
Line Interface (MSA-CLI) to reassign
spare hard drives as needed.
125 ACCESS CONTROL
CONFLICT DETECTED
Error
A set of volumes have been
migrated from one array controller
to a different array controller that
already has con fi gured volumes
on it. The migrated volumes have
access controls de fi ned for them
that con fl icts with the existing
con fi guration. The access controls
have been modi fi ed so as to allow
the migration to proceed.
Run the HP Storage Management
Utility or MSA-CLI to check the new
access controls and modify them
if needed.
126 ACCESS CONTROL
RESOURCES EXCEEDED
Error
A set of volumes have been
migrated from one array controller
to a different array controllers that
already has con fi gured volumes
on it. The migrated volumes have
access controls de fi ned for them
that con fl icts with the existing
con fi guration. The access controls
have been modi fi ed so as to allow
the migration to proceed.
Run the HP Storage Management
Utility or MSA-CLI to check the new
access controls and modify them
if needed.
120
MSA controller LCD panel message descriptions