HP StorageWorks 1510i - Modular Smart Array, User Manual, Page: 117 / 160

Message Type
Description Action
73 CACHE HARDWARE
BATTERIES MISSING
Error
The cache module does not have
its required batteries attached to it.
If the failure occurred on the
standby array controller, remove
the standby array controller,
remove cache, attach cache
batteries, replace the cache
modules, wait 10 seconds, and
then reinsert the array controller,
ensuring that it is fully seated in
the chassis.
If the failure occurred on the
active array controller, wait until
downtime is available. Power
off the MSA, remove the array
controller, replace the cache
modules, and reinsert the array
controller, ensuring it is fully seated
in the chassis.
Should the issue persist, contact
HP support.
80 REPLACEMENT
DRIVE FOUND BOX
#<n> BAY <n>
Informational
A SCSI hard drive that was
previously missing or failed has
now been replaced with a working
SCSI drive.
81 SMART DRIVE
ALERT BOX #<n>,
BAY <n>
Informational
A SCSI hard drive may be close to
failing. This was determined either
by the hard drive fi rmware itself
using SMART technology or by the
array controller using monitor and
performance testing.
The hard drive should be replaced
as soon as possible.
82 DRIVE HOT ADDED
BOX #<n>, BAY <n>
Informational
A SCSI hard drive has been
added to the system in the location
speci fi ed in the message.
83 DRIVE HOT
REMOVED BOX #<n>,
BAY <n>
Informational
A SCSI hard drive has been
removed from the system in the
location speci fi ed in the message.
84 DRIVE FAILURE
BOX #<n>, BAY <n>
Error
A SCSI hard drive in the system
has failed. If the hard drive was
part of a con fi gured volume, then
the state of the volume depends on
the fault tolerance used.
Replace the drive as soon as
possible.
85 BAD DRIVE
FIRMWARE BOX #<n>,
BAY <n>
Error
A SCSI drive has been detected
that has known, bad fi rmware
on it. Continued usage of this
drive could result in drive failure,
decreased performance or data
loss.
Update the hard drive fi rmware or
replace the hard drive as soon as
possible.
86 DRIVE POSITION
CHANGE DETECTED
Informational
The SCSI hard drives that make
up a con fi gured volume have
been physically moved within
the system. The array controller
has updated its con fi guration
information accordingly.
87 DRIVE POSITION
CHANGE INVALID
Informational
The SCSI hard drives that make
up a con fi gured volume have
been physically moved in such a
way that the array controller can
no longer access the con fi gured
volume.
Power the MSA off and restore
drives to their original positions.
1510i Modular Smart Array installation and user guide
117