Hardware options installation 98
Cable routing to connect a SATA device
15.
Install the access panel (on page
32
).
16.
Do one of the following:
o
If the server is in a tower configuration, return the server to an upright position.
o
If the server is in a rack configuration, slide the server into the rack.
17.
Connect each power cord to the server.
18.
Connect each power cord to the power source.
19.
Power up the server (on page
29
).
20.
Do one of the following:
o
For tower models, install the tower bezel (on page
31
).
o
For rack models, install the security bezel ("
Security bezel option
" on page
48
).
LFF media cage option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (
http://www.hp.com/go/qs
).
To install the component:
1.
Do one of the following:
o
For tower models, open and remove the tower bezel ("
Remove the tower bezel
" on page
30
).
o
For rack models, if installed, remove the security bezel ("
Remove the security bezel (optional)
" on
page
30
).
2.
Power down the server (on page
29
).
3.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
4.
Do one of the following:
Summary of Contents for ProLiant ML350 Gen9
