Hardware options installation 55
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
4.
Extend the server from the rack (on page
33
).
5.
Remove the access panel (on page
31
).
6.
Remove the air baffle (on page
33
).
7.
Remove the fan cage (on page
36
).
CAUTION:
When routing cables, always be sure that the cables are not in a position where they
can be pinched or crimped.
8.
Install the SID module into the front panel, and then secure the SID module to the chassis with the screws
from the kit.
9.
Route and connect the SID module cable to the system board.
o
LFF configuration
Summary of Contents for ProLiant ML350 Gen9
