HP ProLiant ML110 Operation And Maintenance Manual Download Page 9

Page: 9 / 115

System Features

•

Optional media storage capacity

— Full-height common bay supports any paired combination of tape drive, internal

backup device, or DVD-ROM drive

— Hard disk drive cage that supports four non-hot swappable PATA (Parallel Advanced

Technology Attachment) or SCSI drives

— Hot-swappable drive cage that supports four SATA (Serial Advanced Technology

Attachment) drives

•

•
•

•

External ports, all located on the rear panel of the server. These ports are color-coded for
easy matching to corresponding I/O device.

— PS/2 keyboard port

— PS/2 mouse port

— USB ports (2)

— Monitor port

— Serial port

— Parallel port

— LAN port

Standard autoranging 350-watts power supply unit with PFC function

Cooling system includes a system fan (rear panel) and a CPU fan (attached to the heat
sink)

Software

NOS (Network Operating System) support includes:

— Novell

NetWare

5.1

— Novell NetWare 6.0

— Novell NetWare 6.5

— Novell Small Business Suite

— Red Hat

Linux

9.0

— Red Hat Enterprise Linux ES 2.1

— Microsoft Windows Server 2003 and Small Business Server 2003

Diagnostic tools include:

— BIOS Setup Utility

— Diagnostics for Windows

ACPI (Advanced Configuration and Power Interface)-compliant power management
scheme

1-2

HP ProLiant ML110 Server Operations and Maintenance Guide

Summary of Contents for ProLiant ML110




















































































































Search results

Summary of Contents for ProLiant ML110

Reviews:

Related manuals for ProLiant ML110

Brands by name

Popular brands

HP ProLiant ML110, Operation And Maintenance Manual

Search results

Summary of Contents for ProLiant ML110

Reviews:

Related manuals for ProLiant ML110

Brands by name

Popular brands