BIOS Setup Utility
•
User password
Entering this password will only allow the user to access and modify certain items in the
Setup Utility. These items include:
— Main menu: System Time and System Date
— Security menu: Set User password
•
Power-on password
When the
Password on Boot
parameter in the Security menu is enabled, either the
supervisor or the user password will be required to boot up the server.
To Set a System Password
NOTE:
A Supervisor password should be set first before a User password can be defined.
1. In the Security menu screen, select a set password parameter—
Set User Password
or
Set
Supervisor Password
, then press
Enter
.
A password box will display.
Figure 5-3: Set Password box
2. Type a password.
The password may consist of up to eight alphanumeric characters (A-Z, a-z, 0-9).
3. Retype the password to verify the first entry, then press
Enter
.
4. If you want the new password to be check during bootup, select the
Password on Boot
parameter on the Security menu and set it to
Enabled
.
5. Press
F10
to save the password and close the Setup Utility.
After setting the password, the system automatically changes the chosen password
parameter to
Enabled
.
To Change a System Password
1. In the Security menu screen, select a set password parameter—
Set User Password
or
Set
Supervisor Password
, then press
Enter
.
A password box will display.
2. Type the original password then press
Enter
.
3. Type a new password then press
Enter
.
5-6
HP ProLiant ML110 Server Operations and Maintenance Guide
