BIOS Setup Utility
HP ProLiant ML110 Server Operations and Maintenance Guide
5-11
4. Set SW1-1 to the
On
position.
This will clear the CMOS memory.
5. Switch SW1-1 back to its default
Off
position.
6. Perform the post-installation instructions listed in Chapter 4.
7. During POST, press
F2
to access the Setup Utility.
8. Press
F9
to load the system default values.
9. Press
F10
to save the changes you made and close the Setup Utility.
Setting Hardware Protection
You have the option to lock and unlock some of the hardware devices of the server. Do this to
set the access limit for these items.
1. In the Advanced menu screen, select the
Hardware Protection
parameter, then press
Enter
.
The Hardware Protection submenu displays.
2. Select the hardware item you want to lock.
3. Press the plus (+) or minus (-) key to set the selected hardware to
Lock
.
4. Press
F10
to save the changes you made and close the Setup Utility.
