HP ProLiant DL140 User Manual Download

Page: 61 / 107

Troubleshooting

•

Be sure the monitor and any KVM switch are compatible with the VGA
output of the server.

Slow-moving horizontal lines are displayed

Action

: Be sure magnetic field interference is not occurring. Move the monitor

away from other monitors or power transformers.

Audio problems

Action

: Be sure the server speaker is connected. Refer to the server

documentation.

Printer problems

Printer does not print

Action

Be sure the printer is powered up and online.

Be sure no loose connections (on page

) exist.

Be sure the correct printer drivers are installed.

Printer output is garbled

Action

: Be sure the correct printer drivers are installed.

Mouse and keyboard problems

Action

Be sure no loose connections (on page

) exist. If a KVM switching device

is in use, be sure the server is properly connected to the switch.

−

For rack-mounted servers, check the cables to the switch box and be sure
the switch is correctly set for the server.

−

For tower-model servers, check the cable connection from the input
device to the server.

Summary of Contents for ProLiant DL140












































































































Search results

Summary of Contents for ProLiant DL140

Reviews:

Related manuals for ProLiant DL140

Brands by name

Popular brands

HP ProLiant DL140, User Manual

Search results

Summary of Contents for ProLiant DL140

Reviews:

Related manuals for ProLiant DL140

Brands by name

Popular brands