HP P Class 733/800/866MHz / 1GHz, User Manual

Page: 59 / 158

Chapter 2 43
How to Install Accessories In Your HP Visualize Linux Workstation
Installing Mass Storage Devices
Installing a Drive in a Front-Access Shelf
These instructions explain how to install a drive (such as a flexible disk
drive, a CD-ROM drive, CD-RW drive, or a tape drive) in one of the front-
access drive shelves. You should also refer to the manual supplied with
the drive for any additional installation instructions.
Before Installing
an
IDE Device Refer to the drive’s installation guide to see if you must set jumpers or if
there is a special installation procedure to follow.
Before Installing a
SCSI Device If you are installing a SCSI device, refer to the section “Before Installing
a SCSI Hard Disk” on page 35 before using the following instructions.
1. Disconnect the computer’s power cord and any telecommunications
cable.
2. Remove the computer’s cover (see page 22).
3. Slide out the power supply to provide better access to the disk drive
cables (see page 26).