manualshive.com logo in svg

HP P Class 733/800/866MHz / 1GHz, User Manual

The HP P Class 733/800/866MHz / 1GHz is a high-performance product designed for efficiency. To maximize its potential, refer to the detailed User Manual which you can easily download for free from our website. Explore the product's features and unleash its capabilities with the help of our comprehensive manual.

Share
Download
background image

Chapter 1

7

Setting Up and Using Your HP Visualize Linux Workstation

Connecting an External SCSI Accessory

Connecting an External SCSI Accessory

Your HP V

ISUALIZE

Linux Workstation is equipped with an UltraWide

16-bit SCSI connector for external SCSI devices.

When an external SCSI device is connected, the UltraWide 16-bit SCSI
controller automatically switches to non-Ultra mode (maximum capacity
of 20 MBs per second).

An external SCSI device is connected as follows:

1. You should assign an unused SCSI address to the accessory. SCSI

addresses range from 0 to 15 for wide 16-bit SCSI. The SCSI
address 0 is reserved for the first SCSI hard disk drive and SCSI
address 7 is reserved for SCSI controller (the default for narrow and
wide SCSI devices).

Refer to the manual provided with the SCSI accessory for
instructions on selecting a SCSI address.

NOTE

You don’t need to set a SCSI address for Plug and Play SCSI devices
(SCSI devices which support the SCAM protocol).

2. Make sure the SCSI accessory is terminated correctly—either

internally or by a terminating resistor (refer to the manual provided
with the SCSI accessory).

Make sure the SCSI
accessory is terminated

Summary of Contents for P Class 733/800/866MHz / 1GHz































































































































































Reviews:

No comments

Related manuals for P Class 733/800/866MHz / 1GHz

Tascam CA-XLR2d Manual preview
CA-XLR2d
Brand: Tascam Pages: 2
Tektronix TCA-VPI50 Instructions preview
TCA-VPI50
Brand: Tektronix Pages: 2
Zenisu Keisoku,Inc. ZS-6224P User Manual preview
ZS-6224P
Brand: Zenisu Keisoku,Inc. Pages: 21
Avaya S8500 Series Quick Start For Hardware Installation preview
S8500 Series
Brand: Avaya Pages: 22
Grandstream Networks HandyTone-286 Rev 3.0 User Manual preview
HandyTone-286 Rev 3.0
Brand: Grandstream Networks Pages: 12
X-Micro XWL-11BUZX User Manual preview
XWL-11BUZX
Brand: X-Micro Pages: 20
DKT Comega IPLoC D2-POM-n Quick Manual preview
IPLoC D2-POM-n
Brand: DKT Comega Pages: 24
Eusso 85Mbps Powerline HomePlug Ethernet Adapter User Manual preview
85Mbps Powerline HomePlug Ethernet Adapter
Brand: Eusso Pages: 11
EtherCAT EZ-ZONE RMZ4 User Manual preview
EZ-ZONE RMZ4
Brand: EtherCAT Pages: 74
Wayne-Dalton USB Z-Wave User Manual preview
USB Z-Wave
Brand: Wayne-Dalton Pages: 42
Velleman PCUSBHDMI User Manual preview
PCUSBHDMI
Brand: Velleman Pages: 30
Micro Connect HDMDPP1 User Manual preview
HDMDPP1
Brand: Micro Connect Pages: 5
NETGEAR XAV1301 (Russian) preview
XAV1301
Brand: NETGEAR Pages: 2
Lenovo Intel X520 Product Manual preview
Intel X520
Brand: Lenovo Pages: 17
Lenovo Flex System FC3172 Product Manual preview
Flex System FC3172
Brand: Lenovo Pages: 10
Lenovo QLogic Enhanced Gen 5 Product Manual preview
QLogic Enhanced Gen 5
Brand: Lenovo Pages: 10
Lenovo H230 - Desktop 4GB 1TB HDD Reference Manual preview
H230 - Desktop 4GB 1TB HDD
Brand: Lenovo Pages: 28
Lenovo Thinkpad 72W Slim User Manual preview
Thinkpad 72W Slim
Brand: Lenovo Pages: 52

Brands by name

Popular brands

Load more brands